Performance Data Sheet
Model: BOROUX Legacy™ Water Filter System (BX-L-SYS-3) With BOROUX Foundation™ Filters (BX-FND9-2 and BX-FND9-2-CA)
|
This system has been tested according to NSF/ANSI 42 and 401 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42 and 401. |
|
|
Substance |
Average Influent Concentration |
NSF/ANSI Specified Challenge Concentration |
Average Percent Reduction |
Percent Reduction Requirement |
| NSF/ANSI 42 | Nominal Particulate Class I(Particles ≥0.5 μm to ≤1.0 μm) | 6,500,000 particles/mL | At least 10,000 particles/mL | 98.9% | ≥85% |
| NSF/ANSI 401
|
Mircroplastics, ≥0.5 μm to ≤1.0 μm | 6,500,000 particles/mL | At least 10,000 particles/mL | 98.9% | ≥85% |
BX-FND9-2 and BX-FND9-2-CA replacement Filters can be purchased at www.boroux.com.
Compounds certified under NSF/ANSI 401 have been deemed as “incidental contaminants/emerging compounds”.
BOROUX Foundation Filter Specifications
Operating Temperature: Min. 40°F/4°C – 100°F/38°C
Replacement Filters: BOROUX Foundation Filter (BX-FND9-2 or BX-FND9-2-CA) can be purchased at www.boroux.com
Maintenance according to the manufacturer’s instructions is essential for proper filter performance. See system User’s Manual for warranty information.
Testing was performed under standard laboratory conditions. Actual filter performance may vary based on source water and usage. The contaminants that were tested may not be in all users’ source water.
BOROUX products are not intended microbiologically unsafe water.
Contact Customer Service:
1-800-350-4170
BOROUX 1981 Aspen Circle, Pueblo, CO 81006
Manufactured by: James Enterprise, Inc., 1981 Aspen Circle, Pueblo, CO 81006
